Home > Service Fuser > Lexmark Service Fuser Error

Lexmark Service Fuser Error

Contents

Those tend to get dirty after a while and just needs to be cleaned with water and lint free cloth or may even need to be replaced. I had replaced the fuser, transfer roller, charge roller, and the hvps. All rights reserved. This gives the printer's engine board a chance to reset. weblink

If this error appears shortly after the fuser unit in the printer is replaced, put the old fuser unit back in. Make sure that nothing is stuck inside the fuser unit that cancause the fuser unit to overheat. eCommerce Solution : k-eCommerce Sign Up Login Add Question riccardi asked Feb 6, 2006 at 7:41am 0 Lexmark Optra S 922 Service Fuser Error Optra S 2450 Hi,I just replaced the It doesn't smell like anything's burning anymore, so that's good.This is what it's doing: it prints out gray paper. http://support.lexmark.com/index?page=content&id=SO1583

920.06 Service Fuser Error

I would recommend trying the easy parts first to eliminate your problems. If you cannot find anything jammed up or broken in the back of the printer,open the upper front cover of the printer and remove the toner cartridge. Anyway, I looked at the photoconductor, and there are words all over it. Call us with any questions toll-free 866-352-7108 or local 608-831-2396.

That uneven distribution of gray all over the paper, you know what I mean? I double-checked all the cables, and I no longer get the message, so that's cool... The charge roller and the transfer roller can also cause light printouts. 922.02 Service Fuser Error and may not be used without advance written permission of PrinterTechs.com, Inc.

If this does not clear up the fuser error, the problem may be in one of the following: the fuser cover assembly the engine board the DC fuser cable the fuser The old fuser didn't give the error, but my prints would have toner fog all over them, so I checked the manual and replaced the fuser and it hasn't worked since.Can The rear door opens and dropsdown towards you. http://support.lexmark.com/index?page=content&id=SO4036&modifiedDate=11/14/13 So yes it does sound like the hvps.

by Anonymous on Feb 6, 2006 at 12:16pm Add comment Please sign in to comment 0 Another thing you can check is the charge roller located above the toner cartridge. Lexmark T640 Fuser Replacement The transfer roller gets caked with toner. If the printer is already on a wall outlet, plugging the printer into a different outlet may solve the problem. Leave the printer off for at least 10 seconds before turning it back on.

Lexmark 924.01 Service Fuser Error

This will cause dirty print jobs to appear on the paper. their explanation For a temporary fix, you can try turning the printer off and back on again, sometimes the reboot allows the fuser to reset so you can print a few more pages.  920.06 Service Fuser Error by Anonymous on Feb 6, 2006 at 1:11pm Add comment Please sign in to comment 0 I would try another toner cartridge and see if that helps first. Lexmark X654de Service Fuser Error If not, you may have a defective fuser.

It looks like when you photocopy nothing and print it out. have a peek at these guys If this isthe first time you have seen the error, turn the printer off. Leave the printer off for at least 10 seconds before turning it back on. Look into the back of the printer. Lexmark Fuser Replacement

Fortunately, replacing fusers on these model is not difficult.  (Remove the back cover, unscrew 2 screws on the fuser, unplug the fuser, and pull the fuser assembly out.)  We have installation If the printer has not recently had its fuser replaced, plug the printer directly into a wall outlet. I ran into a problem where the toner cartridge was dumping toner onto the transfer roller, the one located below the toner cartridge. check over here This gives the printer's engine board a chance to reset.

If this is an intermittent error, you may want to check how the printer is plugged in, even ifit has worked on this surge device for months. 920.26 Service Fuser Error Lexmark Send an Email Toll Free: 877-365-1903 About us Terms Contact us Help Login Brand : All brands HP Models Lexmark Models Xerox Models Model : Choose a brand Look into the printer from the front.

To check for any stuck sheets of paper in the fuser unit: Locate the rear door and open it.

I've read a bunch of posts that pertain to this topic, but still haven't figured out how to fix my situation. A 924 Fuser Error indicates that an open circuit has been detected in the fuser thermistor circuit. The transfer roller was caked with toner all over it. 122.02 Service Fuser Error Respond to this 0 If you try and put your old fuser in that you replaced do you still get the message?

If you need the correct part number, you can find it here. My Account| Cart| Order Status Market Point Search: select Advanced search Read Customer Reviews GSA Contract Schedule Enter Here Need Assistance? If this isthe first time you have seen the error, turn the printer off. http://jvmwriter.org/service-fuser/lexmark-error-922-service-fuser.html Turned out to be the (HVPS) High Voltage Power Supply.

It's just not transferring from there to the paper. by riccardi on Feb 6, 2006 at 12:38pm Add comment Please sign in to comment 0 Are you getting really light printouts? Make sure the printer is plugged straight to the wall and not through a surge device or power strip. See our links to purchasing info below.

Surge protectors and power strips can sometimes regulate the voltage to a fault for the printer. If nothing appears to be jammed in the printer, the fuser unit or the main power supply of the printer will probably need to be replaced to fix this problem. PrinterTechs.com 608-831-2396 or 866-352-7108 About Us Contact Us Search Products Search Support All Products PrintersHewlett PackardLexmarkCables and Misc.JetDirect CardsBrotherKyoceraDell Toner Maintenance Kits Printers Parts If you have tried the printer on other wall outletsand the 925 Fuser Error still appears, the printer will require service to clear the message.

If the error message goes away with the old fuser unit, please check that the new fuser unit is the correct one for this printer model. If this does not help or if thiserror appears every time the printer is powered on, you will probably need service on the machine. Keep in mind that there is no need to have the printer connected to a computer during testing for a fuser error as any pages to test the functionality of the by Anonymous on Feb 6, 2006 at 12:27pm Add comment Please sign in to comment 0 Turns out one of the cables was loose on the fuser.

by riccardi on Feb 6, 2006 at 1:22pm Add comment Please sign in to comment 0 When I ran into the issue I had it was printing real light at first. See if there is any paper or any other item stuck there that could be causing the fuser unit to overheat. Back to Service Error Code List Source: Lexmark KnowledgeBase Home Page Technical Resources Lexmark Error Codes HP Error Codes Tech Support Blog HP Drivers Lexmark Drivers Terms & Conditions Product