Home > Paper Jam > Laserjet 4000n 13 Paper Jam Error

Laserjet 4000n 13 Paper Jam Error


All Rights Reserved. Rankning kan göras när videoklippet har hyrts. Check the paper path for obstructions at the Transfer Roller, Toner Cartridge, Paper Feed Guide, and Fuser. 3. Not only is it useless for clearing unseen jams, but it's a deskjet printer that bears about as much resemblance to a 4000 as a Yugo does to a Bentley. - this contact form

Now do the same paper path test and see what happens. Replace any defective sensors or flags 13.21 DOOR OPEN JAM The top cover was open while printing 1. and may not be used without advance written permission of PrinterTechs.com, Inc. If it goes ready and only gives a jam when you try to print, remove the tray and clean the little "D" shaped rollers up inside the printer.

Hp Laserjet 4000 Error 13.20 Paper Jam

Odds are it will now work. Logga in om du vill lägga till videoklippet i Titta senare Lägg till i Läser in spellistor... Just clean off the glue residue and reassemble and you should be good to go. by unknown on Nov 20, 2007 at 7:41am Add comment Please sign in to comment 0 The fact that it is not producing an error is strange, however, it may be

Check the input area for obstructions such as media in the path. Om Press Upphovsrätt Innehållsskapare Annonsera Utvecklare +YouTube Villkor Sekretess Policy och säkerhet Skicka feedback Pröva något nytt! by Richie_Rich on May 10, 2008 at 8:58am Add comment Please sign in to comment 0 I have been working on these for a while and am quite used to the Hp Laserjet 4000 Error Codes Open and close the top cover to clear the message. 6.

I also replaced all rollers.thanks again.g by garrett on Feb 21, 2003 at 3:57pm Add comment Please sign in to comment 0 We have 30+ HP LJ 4000 printers, the primary Hp Laserjet 4100 Paper Jam Put your thumbnail under it and lift it to the up position. I took both trays out, and toner, and pushed in the door sensor, and it gives the same message after the rollers/gears rotate for about 4 seconds. http://fixyourownprinter.com/posts/8626 Now with the same thumb and forefinger, grasp the body of the clutch and pull on it and it too will come off of the shaft.

After some cleaning with highpressure-air and re-positioning it now seems OK.Yuk, too much work for such a lousy mecanical part. Hp 4050 Paper Jam Does anyone know why this happens ? by unknown on Mar 24, 2011 at 6:27am Add comment Please sign in to comment 0 I don't see anyone having the same problem with the 13.1 paper jam. precisionroller 46 458 visningar 9:34 How To Replace The hp Laserjet 4200n 4250n 4350n Swing Plate PART 1 - Längd: 5:50.

Hp Laserjet 4100 Paper Jam

That's when we get out our "chingaderous stick". Verify the paper tray is fully closed. 3. Hp Laserjet 4000 Error 13.20 Paper Jam however I got a 13.1 today that I do not under stand. Hp Laserjet 4000 Paper Jam Rear Door Check the input area for obstructions such as paper in the path.

nothing wrong with a Yugo, within it's limitations, if you kept it up. weblink Also check to see if the registration assembly damaged or unseated. 3. HP has never learned in the past 20 years that the stuff disintegrates and causes all kinds of problems. You can change this preference below. 13.1 Paper Jam Open Input Trays

by unknown on Aug 4, 2011 at 1:22pm Add comment Please sign in to comment Please sign in to comment HP DesignJet 4000 Buy discount ink Buy this printer More HP Then just lift the top off of the tray assy. Tray 1 and 2 print fine. navigate here precisionroller 91 369 visningar 7:45 HP Printer Repair - Perform Printer Maintenance Error - Längd: 3:25.

Pull the tray out, you are looking at the separation roller. Hp Laserjet 4000 Pickup Roller Kit Kit Hp 10 371 visningar 5:37 HP LaserJet 4000 Intro and Rebuild Part 1 - Längd: 6:37. by Anonymous on Feb 4, 2007 at 8:34am Add comment Please sign in to comment 0 Hi there, I have a hp 4000 that does something strange.

Reseat the fuser. 3.

We use a piece of sticky back felt that never deteriorates and dampens the noise as well as keeps it from sticking. Anyone have any idea where to go from here? To the user with the problem, you say the paper moves forward 2 inches and then falls back into the tray. by leof on Nov 21, 2007 at 5:28am Add comment Please sign in to comment 0 dmzcompute's suggestion worked great for me too.It took me a while to figure out what

Check sensors and flags for proper operation. 13.1 PAPER JAM OPEN INPUT TRAYS Paper-delay jam at paperfeed area. 1. It will come off of the shaft. An easy fix! - Längd: 7:47. his comment is here by olivier on Jan 27, 2010 at 11:06pm Add comment Please sign in to comment 0 There is a hinged lift up cover on the left.

I just replaced one the other day that was jamming every 100 to 200 pages to find it had a broken tooth on one of the drive gear arms. Kommer härnäst HP LaserJet 4000 4050 13.2 Paper Jam Tray adjustment - Längd: 4:51. Verify that the fuser is properly installed. 13.20 PAPER JAM CHECK REAR DOOR Media stopped in the paper path during power on or when the top door was closed. 1. there was a small, torn piece of paper UNDER the main roller. (the one that resides directly in front of the toner cartridge) couldn't be found without pretty much breaking the

I'll have to give it a try. Transkription Det gick inte att läsa in den interaktiva transkriberingen. Both it and the gray one above it look fine. The rollers/gears on the right hand side (looking inside face)turns maybe 1/2 a turn before the error occurs.

if so replace roller kit 5. Läser in ... No more paper jams! could there be a dirty sensor somewhere?

Anyway, I tried this fix on a 4000, removing about 1/2 of the filings WORKED!Thanks for the tip. Checked paper settings..size/type...all is correct. This error is caused by a defective paper control PCA Replace the paper control PCA 13.2 PAPER JAM OPEN INPUT TRAYS Paper-stopped jam at paper-feed area. 1. Stäng Ja, behåll den Ångra Stäng Det här videoklippet är inte tillgängligt.

helpful! :) by unknown on Aug 3, 2011 at 1:33pm Add comment Please sign in to comment 0 Splitting the printer refers to removing the printer from the tray assy. Message on printer display What it meansWhat to do 13.XX PAPER JAM [LOCATION] Media is jammed at the specified location (and possibly at other locations). Couldn't seem to get tray 3 separated so I could see the mechanisms inside. This allows us, with a flashlight, to watch the pick up assembly as it goes through its process.

Now how do I take it out without breaking it?Prink. Laddades upp den 5 okt. 2010Hp LaserJet 4000 error 13.1 input paper jam www.repair-your-printer-now.com Kategori Instruktioner och stil Licens Standardlicens för YouTube Visa mer Visa mindre Läser in ... I tore it down & checked the solenoids (tray 3 & 2) with an ohm meter & both of them are the same.