Home > Fuser Error > Lexmark 920 Fuser Error

Lexmark 920 Fuser Error

Contents

If this does not clear up the fuser error, the problem may be in one of the following: the fuser cover assembly the engine board the DC fuser cable the fuser Houve um erro com o aplicativo. fr Nous sommes désolés pour ce désagrément. I have changed all the 3 CCA's and the fuser unit , but still I am getting the same error. http://jvmwriter.org/fuser-error/lexmark-fuser-error.html

There was an error with the application. de Wir entschuldigen uns für die Unannehmlichkeiten. fr Nous sommes désolés pour ce désagrément. Also it doesn't allow me to enter into the diagnostics and the service mode. http://support.lexmark.com/index?productCode=&segment=SUPPORTproductCode=&page=content&id=SO4737&locale=EN&userlocale=EN_US

Lexmark 924.01 Service Fuser Error

Call us with any questions toll-free 866-352-7108 or local 608-831-2396. es Lamentamos las molestias. Il ya eu une erreur à l'application. Il ya eu une erreur à l'application.

If this is an intermittent error, you may want to check how the printer is plugged in, even ifit has worked on this surge device for months. This gives the printer's engine board a chance to reset. Did you test the lamp, fuse & thermostat?Read:920 Fuser ErrorFuser Heater Trouble1. Lexmark Fuser Replacement If the thermal fuse is open, replace it.2.

To check for any stuck sheets of paper in the fuser unit: Locate the rear door and open it. 920.06 Service Fuser Error Purchasing information:  Lexmark T640 , T642, T644 series fuser and maintenance kitPurchasing information:  Lexmark T650 , T652, T654 series fuser and maintenance kit Tech Support Support Home PageMaintenance Kit InstructionsOther instructionsTroubleshootingArticles, See our links to purchasing info below. es Lamentamos las molestias.

is there anything else i need to do to sort this? 922.02 Service Fuser Error by unknown on May 17, 2005 at 9:35am Add comment Please sign in to comment 0 Also I am facing the same 920 fuser error on one of my customers printer. From this menu scroll to MAINTENANCE, then select RESET 80 MAINT. br Lamentamos o inconveniente.

920.06 Service Fuser Error

For a temporary fix, you can try turning the printer off and back on again, sometimes the reboot allows the fuser to reset so you can print a few more pages.  http://support.lexmark.com/index?page=content&segment=SUPPORT&locale=en&userlocale=EN&id=SO5058&productCode=LEXMARK_T656 eCommerce Solution : k-eCommerce Lexmark 924.01 Service Fuser Error If this does not help or if thiserror appears every time the printer is powered on, you will probably need service on the machine. Service Fuser Error Lexmark Printer br Lamentamos o inconveniente.

Look into the back of the printer. http://jvmwriter.org/fuser-error/lexmark-200-fuser-error.html A 923 FuserError indicates that the fuser unitis getting too hot while printing or when the printer is idle. Leave the printer off for at least 10 seconds before turning it back on. COUNT. Lexmark X654de Service Fuser Error

Any ideas? This worked for us before during intermittent problems with this error code. and may not be used without advance written permission of PrinterTechs.com, Inc. check over here See if you can see anything jammed into the back area of the printer.

If this isthe first time you have seen the error, turn the printer off. Lexmark T640 Fuser Replacement Make sure the printer is plugged straight to the wall and not through a surge device or power strip. See if there is any paper or any other item stuck there that could be causing the fuser unit to overheat.

Remove the fuser heater cable from the power supply (CN602)and check it for continuity.

Es gab einen Fehler bei der Anwendung. by unknown on Jun 29, 2005 at 11:49am Add comment Please sign in to comment 0 I have a similar problem. Look into the printer from the front. 920.26 Service Fuser Error Lexmark C'è stato un errore con l'applicazione.

There was an error with the application. All rights reserved. I have also replaced the system board on this printer allready.Aaron by unknown on Sep 10, 2007 at 3:52pm Add comment Please sign in to comment Please sign in to comment this content Application Error en We're sorry for the inconvenience.

Application Error en We're sorry for the inconvenience. stuart Respond to this 0 please please can someone help stuart by unknown on Oct 26, 2004 at 11:46am Add comment Please sign in to comment 0 Try going into the If the printer is already on a wall outlet, plugging the printer into a different outlet may solve the problem. it Ci scusiamo per l'inconveniente.

This gives the printer's engine board a chance to reset. Sign Up Login Add Question Stuart asked Oct 22, 2004 at 4:26am 0 Lexmark C 920 920 fuser error lexmark optra c 1200 HELP ME PLEAS Hi all. If nothing appears to be jammed in the printer, the fuser unit or the main power supply of the printer will probably need to be replaced to fix this problem. Old one has an open short on the right side of the fuser.

A 924 Fuser Error indicates that an open circuit has been detected in the fuser thermistor circuit. Leave the printer off for at least 10 seconds before turning it back on. C'è stato un errore con l'applicazione. While initializing the printer beeps and gives this error code by intikhab on Jun 18, 2005 at 4:26am Add comment Please sign in to comment 0 compre una impresora 920 y

by Anonymous on Jun 29, 2005 at 8:52am Add comment Please sign in to comment 0 Are you sure that the fuser was BAD. Es gab einen Fehler bei der Anwendung. Keep in mind that there is no need to have the printer connected to a computer during testing for a fuser error as any pages to test the functionality of the Surge protectors and power strips can sometimes regulate the voltage to a fault for the printer.

Houve um erro com o aplicativo. de Wir entschuldigen uns für die Unannehmlichkeiten. Fortunately, replacing fusers on these models model is not difficult.  We have installation instructions available here. If this doesn’t fix the problem, replace the printer controller board.

I bought a new fuser unit, and fitted it, but the error message remains. PrinterTechs.com 608-831-2396 or 866-352-7108 About Us Contact Us Search Products Search Support All Products PrintersHewlett PackardLexmarkCables and Misc.JetDirect CardsBrotherKyoceraDell Toner Maintenance Kits Printers Parts Tech Support Account Login Shopping Cart My