Home > Error Code > Laserjet Error

Laserjet Error

Contents

HP 500 System error 01:12 The EEROM is not configured correctly. XX Description 00 memory error on the cartridge or 01 memory device not found 10.00.00 Black print cartridge 10.00.01 Cyan print cartridge 10.00.02 Magenta print cartridge 10.00.03 Yellow print cartridge Supplies New models may need the laser scanner assembly replacing. What to do:Where possible, try connecting to a different port on the computer. this contact form

If this doesn't work and replacing the chips still doesn't resolve the problem then you may have to replace the formatter board. If it doesn’t, you will need to replace the sensor PS107. Check SW101 to make sure it is engaged with top cover closed. All new models with tray lift problems can often be resolved by checking for obstructions such as paperclips or other objects. https://www.printertechs.com/printer-troubleshooting/hp-error-codes

Hp Laptop Error Codes

Replace the memory chip cable/connector or the DC controller. System error 79:04 Miscellaneous firmware error. System error 42:10 A problem has occurred with the Scan-Axis motor.

Look for the conductive contacts on the cartridge and the corresponding contacts in the printer and make sure they are clean and free of contaminants. Send an Email Toll Free: 877-365-1903 About us Terms Contact us Help Login Brand : All brands HP Models Lexmark Models Xerox Models Model : Choose a brand Firmware updates are available for some machines at http://hp.com and clicking on the drivers and software tab. Hp Printer Error Code Oxc4eb827f If yes, check it and see any bad file printed, delete that job and then turn on the printer and it should be all set to go!!!

Alternatively you can install additional memory if available. Hp Computer Error Codes The event is 98.02.01 and the description is [[cELPartnMgrWipePartNotFoundError]]Thank you Reply 0 0 VisionAiry Distinguished Professor Posts: 3,396 Member Since: ‎02-15-2013 Message 4 of 16 (53,327 Views) Report Inappropriate Content Re: Again on the LJII/III we are starting to see more and more failures of the gear drive assembly. Plug the printer into a wall outlet and see if this resolves the problem. 2 If the printer is already plugged into a wall outlet, try another power source in the

If unresolved, remove all cards/accessories and replace one my one to identify what is at fault. Hp Printer Error Code List Pdf Check that PS1 is blocked by the latch flag. What to do:These faults typically needed assistance from an experienced HP engineer. Fuser is failing to warm up. 50.2 Warm up failure.

Hp Computer Error Codes

Replace main motor IIIP/IIP+/IIP Error 57-1 Incompatible memory can be either top or bottom slot. https://www.marketpoint.com/hp-printer-error-codes.aspx You can check on the manual that comes with your HP printers when these codes appear on the printer’s display. © Teffont Business Systems Limited 2016All Rights Reserved all 3rd party Hp Laptop Error Codes HP Error Code:71 - Faulty MIO Card or SIMMs or Wrong Cartridge Explanation:Either the SIMM or cartridge installed is incompatible with the printer or the MIO card is faulty (older models). Hp Inkjet Printer Error Codes Bad fuser bulb. 3.

ERROR 50.XXXX - ERROR 51 (Loss of beam detect) This is a beam detect error indicating a problem with the laser scanner. weblink Press (Down Arrow) button once. The error 10 indicates a problem with the printer obtaining the information from this chip. by Stephen on Jul 22, 2005 at 5:43pm Add comment Please sign in to comment 1 HP Laser User,we have been having problems (such as only the first page could be Hp Printer Error Code 79

What to do:Turn the printer off and on and see if this resolves the problem. Is the software set for the size you're using? Check the feed and separation rollers in the printer and in the tray. navigate here by unknown on May 10, 2010 at 9:52pm Add comment Please sign in to comment I would suggest you read the thread and use the solutions that seem to have worked

by unknown on May 27, 2010 at 11:53am Add comment Please sign in to comment 0 We also got the 49.4C02 service error on our HP Color LaserJet 5550 printer. Hp Printer Error Code 0x610000f6 Replace if defective An abnormal connection break may have occurred during data transfer - Press Continue or Go to clear this error message. This error can also be caused by a defective interlock switch assembly.

Error 22 Error/ I/O Config Error/ Par I/O Error/MIO Error 22 EIO X BUFFER OVERFLOW The EIO card in slot X has overflowed it's buffer and data loss will occur 22

Replace main motor. Turn the printer on. If the error persists you may need a new duplex unit. Hp Printer Error Code 49 Simplify the print job by removing font changes and/or graphics.

What is this error and what can you do about it? Check Drum Sensitivity microswitches. Defective Paper Control Sensor PCB - These do fail and will need to be replaced. his comment is here Be careful with labels, use only labels designed to take the heat generated by the fuser assembly.

Formatter board is a large chip found inside the printer. Also check for any partially peeled labels, this can be a disaster if they come off inside the printer. If it's broken, you will need to replace the sensor flag. Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.When a solution is found please mark the post that solves your issue.Every problem has a solution!

What to do:Check whether tape has been left on the printer cartridges and remove it, if not then this error code typically requires assistant from a HP engineer. Most times this can simply be reinstalled. On rareoccasions, the formatter is at fault, which is usually indicated by a 79 Service Error.1. Remove I/O cables. (Cable is hooked up incorrectly or bad interface in computer.) 2.

Can you make a copy? Press GO to resume printing. Regular labels my 'ooze' adhesive as they pass through the fuser assembly and literally gum up the works! Press and hold down the checkmark (Select) button while the memory is counting.

by Anonymous on Aug 25, 2006 at 4:19am Add comment Please sign in to comment 0 If the error code continues to come back, it requires a firmware upgrade. by unknown on Jan 25, 2012 at 10:42am Add comment Please sign in to comment Please sign in to comment HP Color LaserJet 5500 Buy discount ink Buy this printer More Replace the formatter and calibrate the printer. Same as error 51.

Replace appropriate fan as needed. by skyout on May 22, 2008 at 2:04am Add comment Please sign in to comment 0 Nice job, it workd as you said. X PRINTER ERROR a loss of beam detects occurred. Press the checkmark button once. (Note: on LaserJet's 4200, 4300, 9000 you can hold down the checkmark button as you turn the power on and then wait for the three LEDs

IIISi/4Si Only: 1.